The all new "Where are you today?" thread

[Steve]

 

[Steve]

Packing    killing 3 hours in this bastard heat after check out    and then the long hot trek home.

 

[Barman]

Working in the garden, plastering and fitting new garden taps...

[Barman]

Plastering, cutting some roof tiles, painting and moar platsering... 

[Steve]

unpacking the essentials, bring home cats from kennels and collapse until Sunday

[Grumpmeister]

I'm starting to wonder if the cult of Baldymort has invaded. Everywhere I look there are confused looking elderly gentlemen wearing socks and sandals..

 

[Barman]

I'm starting to wonder if the cult of Baldymort has invaded. Everywhere I look there are confused looking elderly gentlemen wearing socks and sandals..

 

 

[apc2010]

Packing and then Basel

Freiburg was very good, spent a fortune on a new cuckoo clock to replace the one we bought 40 years ago

So Basel 40 …..    

[Steve]

Packing and then Basel

Freiburg was very good, spent a fortune on a new cuckoo clock to replace the one we bought 40 years ago

So Basel 40 …..    

Think Basel was 39

[Steve]

The man from Miele is here again so £££

But it is the wishdosher that's bust so some things just have to be sorted and pronto.

[Barman]

The man from Miele is here again so £££

But it is the wishdosher that's bust so some things just have to be sorted and pronto.

We have Panicos and his Tardis van full of parts here... 

When the Miele wishdosher packed up, he had a quick listen, dismantled it, desoldered a sensor, soldered a new one from the Tardis and put it all back together and fixed a leak under the sink at the same time - €50! 

Shall I send him over...? 

[Steve]

The man from Miele is here again so £££

But it is the wishdosher that's bust so some things just have to be sorted and pronto.

We have Panicos and his Tardis van full of parts here... 

When the Miele wishdosher packed up, he had a quick listen, dismantled it, desoldered a sensor, soldered a new one from the Tardis and put it all back together and fixed a leak under the sink at the same time - €50! 

Shall I send him over...? 

Might be cheaper.  But seems it wasn't the sensor and Mihai the Miele Man is very good - he's fixed the Washing machine several times and the induction hob before - all under guarantee but this time not so.

[Steve]

Update:  he found and replaced the failed O ring gasket and then the circuit board that the resulting leak had ruined and found a problem with the earth continuity to the supply. 

Took over 2 hours so £200 doesn't sound so bad.  (An equivalent replacement machine is well over £1k now)

[apc2010]

Update:  he found and replaced the failed O ring gasket and then the circuit board that the resulting leak had ruined and found a problem with the earth continuity to the supply. 

Took over 2 hours so £200 doesn't sound so bad.  (An equivalent replacement machine is well over £1k now)

Washing up gloves are like a quid ….

[Barman]

Update:  he found and replaced the failed O ring gasket and then the circuit board that the resulting leak had ruined and found a problem with the earth continuity to the supply. 

Took over 2 hours so £200 doesn't sound so bad.  (An equivalent replacement machine is well over £1k now)

Washing up gloves are like a quid ….