The Virtual Pub
Come Inside... => The Snug => Topic started by: Grumpmeister on April 03, 2020, 06:55:06 PM
-
These are on sale at the moment...
(https://forgeofsvan.com/wp-content/uploads/2016/12/Bascinet-Klappviser-25.jpg)
https://forgeofsvan.com/product/bascinet-klappviser/?fbclid=IwAR1C2TYi-wLPEQbMTuLWmbJfKCq1-RnDtF1TvNbfnHRwMyriWsQEV1xTUIw
rubschin:
-
These are on sale at the moment...
(https://forgeofsvan.com/wp-content/uploads/2016/12/Bascinet-Klappviser-25.jpg)
https://forgeofsvan.com/product/bascinet-klappviser/?fbclid=IwAR1C2TYi-wLPEQbMTuLWmbJfKCq1-RnDtF1TvNbfnHRwMyriWsQEV1xTUIw
rubschin:
I could print that... rubschin:
-
These are on sale at the moment...
(https://forgeofsvan.com/wp-content/uploads/2016/12/Bascinet-Klappviser-25.jpg)
https://forgeofsvan.com/product/bascinet-klappviser/?fbclid=IwAR1C2TYi-wLPEQbMTuLWmbJfKCq1-RnDtF1TvNbfnHRwMyriWsQEV1xTUIw
rubschin:
I could print that... rubschin:
In Titanium...? rubschin:
-
These are on sale at the moment...
(https://forgeofsvan.com/wp-content/uploads/2016/12/Bascinet-Klappviser-25.jpg)
https://forgeofsvan.com/product/bascinet-klappviser/?fbclid=IwAR1C2TYi-wLPEQbMTuLWmbJfKCq1-RnDtF1TvNbfnHRwMyriWsQEV1xTUIw
rubschin:
I could print that... rubschin:
In Titanium...? rubschin:
I could spray it Titanium... whistle:
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
So 19000 engineers and BM ....... whistle:
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
So 19000 engineers and BM ....... whistle:
So we’re doomed then... tunble:
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
I started printing them here but I got mixed-messages about their actual value - discussed in the 'Where are you today?" thread I think...
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
I started printing them here but I got mixed-messages about their actual value - discussed in the 'Where are you today?" thread I think...
You did indeed
Got my 3D printer going again for the first time in the new apartment. Managed to find all the bits and get the software running. cloud9:
I've been asked if I could help print some 'face mask supports' for the health service. rubschin:
I reckon it could be a scam, I've no idea why a health care professional would trust their PPE to a (potentially infected) bloke printing stuff in a spare room in Pissouri...? Shrugs:
Nonetheless, it is a challenge and something to do... Thumbs:
(https://i.postimg.cc/ppMJ10PD/IMG-20200330-120717.jpg) (https://postimg.cc/ppMJ10PD)
So I printed a pile of bits yesterday.
When I asked how the medical service could accept something from a bloke in Pissouri without knowing they were safe I was told that they would sanitise them first...
...but then I asked if they could sanitise them why would they chuck them away after one use and hence need some bloke in Pissouri to print them...? Shrugs:
Good point well made :thumbsup:
-
Are you not printing visors and stuff for the cause yet then BM? 19000 engineers here are helping so it said on the news tonight. rubschin:
I started printing them here but I got mixed-messages about their actual value - discussed in the 'Where are you today?" thread I think...
You did indeed
Got my 3D printer going again for the first time in the new apartment. Managed to find all the bits and get the software running. cloud9:
I've been asked if I could help print some 'face mask supports' for the health service. rubschin:
I reckon it could be a scam, I've no idea why a health care professional would trust their PPE to a (potentially infected) bloke printing stuff in a spare room in Pissouri...? Shrugs:
Nonetheless, it is a challenge and something to do... Thumbs:
(https://i.postimg.cc/ppMJ10PD/IMG-20200330-120717.jpg) (https://postimg.cc/ppMJ10PD)
So I printed a pile of bits yesterday.
When I asked how the medical service could accept something from a bloke in Pissouri without knowing they were safe I was told that they would sanitise them first...
...but then I asked if they could sanitise them why would they chuck them away after one use and hence need some bloke in Pissouri to print them...? Shrugs:
Good point well made :thumbsup:
It's going to depend on what chemicals are used in the sanitisation process, it could be that the plastic used for 3d printing can only handle being exposed to them once or twice.
-
Err that's not the point BM made
-
Err that's not the point BM made
Nope.
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
No, I was agreeing with you that it wasn't the point I made... ::)
If they can clean the shit infected stuff I send them they can re-use the stuff they have...
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
No, I was agreeing with you that it wasn't the point I made... ::)
If they can clean the shit infected stuff I send them they can re-use the stuff they have...
Bear in mind that most of the stuff is manufactured in China and a lot of it is getting sent back for being of crap quality so it wouldn't surprise me to find out that a large percentage of the existing stocks wouldn't survive being sanitised more than a couple of times.
https://www.ft.com/content/f3435779-a706-45c7-a7e2-43efbdd7777b
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
No, I was agreeing with you that it wasn't the point I made... ::)
If they can clean the shit infected stuff I send them they can re-use the stuff they have...
Exactly :thumbsup:
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
No, I was agreeing with you that it wasn't the point I made... ::)
If they can clean the shit infected stuff I send them they can re-use the stuff they have...
Bear in mind that most of the stuff is manufactured in China and a lot of it is getting sent back for being of crap quality so it wouldn't surprise me to find out that a large percentage of the existing stocks wouldn't survive being sanitised more than a couple of times.
https://www.ft.com/content/f3435779-a706-45c7-a7e2-43efbdd7777b
When you say 'a lot of it' you mean the small % of stuff some fool tried buying from unapproved sources
The big problem with Chinese stuff now appears to be your chum Trump is pirating it https://www.ft.com/content/03e45e35-ab09-4892-899d-a86db08a935c
And the sanitising will be an issue for the filter material but that's not the part you can 3D print
-
Err that's not the point BM made
Nope.
So you weren't pointing out that that could reuse the plastic parts of existing face masks by disinfecting them?
No, I was agreeing with you that it wasn't the point I made... ::)
If they can clean the shit infected stuff I send them they can re-use the stuff they have...
Bear in mind that most of the stuff is manufactured in China and a lot of it is getting sent back for being of crap quality so it wouldn't surprise me to find out that a large percentage of the existing stocks wouldn't survive being sanitised more than a couple of times.
https://www.ft.com/content/f3435779-a706-45c7-a7e2-43efbdd7777b
When you say 'a lot of it' you mean the small % of stuff some fool tried buying from unapproved sources
The big problem with Chinese stuff now appears to be your chum Trump is pirating it https://www.ft.com/content/03e45e35-ab09-4892-899d-a86db08a935c
And the sanitising will be an issue for the filter material but that's not the part you can 3D print
Strange, I thought Trump was president of the US not the EU. Spain, Italy, the Netherlands, Turkey and Belgium to name but a few have all sent back masks because they were found to be faulty. The Dutch government alone ended up recalling 600,000 FFP2 masks from hospitals after tests showed the masks didn’t fit properly or had defective filter membranes to stop the transmission of the virus not to mention deciding not to use the remaining 700,000 additional masks that made up the rest of the shipment.
-
So it's OK in your book for Trump to hijack shipments on route from China to Berlin?
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
Well do we know that the returns were bought from approved companies? The first case I researched turned out to have very much not been
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
Well do we know that the returns were bought from approved companies? The first case I researched turned out to have very much not been
The testing kits sent to Spain weren't but as far as I can tell the masks were.
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
Well do we know that the returns were bought from approved companies? The first case I researched turned out to have very much not been
The testing kits sent to Spain weren't but as far as I can tell the masks were.
The story about the diverted masks seems to be uncertain. Trump didn't help though by bragging about seizing 200,000 ventilators the very same day that consignment of 200,000 ventilators got taken by someone on route to the Berlin police
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
Well do we know that the returns were bought from approved companies? The first case I researched turned out to have very much not been
The testing kits sent to Spain weren't but as far as I can tell the masks were.
The story about the diverted masks seems to be uncertain. Trump didn't help though by bragging about seizing 200,000 ventilators the very same day that consignment of 200,000 ventilators got taken by someone on route to the Berlin police
Was that the Kenya shipment? If not then that will be three bound for Germany that have apparently been swiped... rubschin:
-
No, I'm obviously not fine with it, no sensible person would be. I was clarifying your comment about the returns being a small percentage bought from unofficial sources.
Well do we know that the returns were bought from approved companies? The first case I researched turned out to have very much not been
The testing kits sent to Spain weren't but as far as I can tell the masks were.
The story about the diverted masks seems to be uncertain. Trump didn't help though by bragging about seizing 200,000 ventilators the very same day that consignment of 200,000 ventilators got taken by someone on route to the Berlin police
Was that the Kenya shipment? If not then that will be three bound for Germany that have apparently been swiped... rubschin:
don't think so https://www.bbc.co.uk/news/world-52161995